The Paint Inspection Kit is an essential piece of equipment for all industrial painters, enabling them to have all the necessary test equipment to ensure the industrial paint coating is correctly applied throughout the coating process in compliance with ISO Standards.
Supplied in an industrial foam-filled Carrying Case, ensuring that all the equipment is easily available and transportable.
The Equipment supplied in the Paint Inspection Kit will allow on site testing for all five stages of the following ISO Standards .
STAGE 1: SURFACE PROFILE
ISO 8503-5: Replica Tape method for the determination of the surface profile.
Testex Tape (R1002) and Testex Gauge (R1004)
A unique replica technique and a snap gauge makes possible accurate, blast-cleaned surface profile measurements. Testex Tape makes surface replicas easy to obtain and
produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs.
STAGE 2: SURFACE CLEANLINESS
ISO 8502-6: Extraction of soluble contaminants for analysis – the Bresle method
ISO 8502-9: Field method for the conductometric determination of water-soluble salts.
Bresle Test (P2005)
Steel when blast-cleaned can be contaminated by Water-soluble salts and corrosion products. These compounds are almost colourless and are localized at the lowest point of the rust pits. If they are not removed prior to painting, chemical reactions can result in blister formation and accumulations of rust that destroy the adhesion between the substrate and the applied protective coating.
This contamination can be tested quickly and easily using the Bresle Test.
STAGE 3: SURFACE CLEANLINESS
ISO 8502-3: Assessment of dust on steel surfaces prepared for painting
(pressure-sensitive tape method).
Dust Test (PS201)
Assess the quantity and size of dust particles on steel surfaces prepared for painting. Dust particles on blast-cleaned steel surfaces may reduce the adhesion of applied coatings, and by absorbing moisture may promote the corrosion of the steel surface.
STAGE 4: CLIMATIC CONDITIONS
ISO 8502-4: Guidance on the estimation of the probability of condensation prior to paint application.
Dewpoint Meter (H3001)
The Dewpoint Meter enables testing for the estimation of the probability of condensation on a surface to be painted and establishing whether conditions at the job site are suitable for painting or not.
STAGE 5: COATING THICKNESS
ISO 2808: Paints and varnishes – Determination of film thickness
Eban 4000 Coating Thickness Meter (C4001)
Measures all coatings on steel and iron substrates using the magnetic induction principle, ensuring the correct coating thickness has been applied.
Other models of the Eban 4000 can be supplied for thick coatings or non-ferrous substrates.
Calibration Certificates with traceability to UKAS and NIST are an optional extra. The Certificates are supplied as hard copy and are available online through the Calibration Portal (under Browse Categories) on our website. The Calibration Portal will list all your equipment calibrated by Paint Test Equipment, showing the renewal dates and allowing Calibration Certificates to be viewed at any time.
Select Item For Pricing
£1395 GBP (Ex VAT)